Replacing Toilet Tank Lever

Replacing Toilet Tank Lever. If the chain is too long, the tank will not completely drain. I'd love to hear about it!

REPLACEMENT FOR TOTO THU004#CP CHROME PLATED TOILET HANDLE ... from i.ebayimg.com

Remove the mounting nut on the back of the trip lever by rotating it counterclockwise (fig. Insert the new handle and tighten the nut with your fingers, turn counterclockwise, yes it is backwards. An old toilet tank lever could be worn out from years of use and cause flushing problems.

Did this video help you?

Try the handle periodically during the bending of the level until you get a proper flushing cycle. By now you should have purchased a replacement lever and you are ready to go. If the chain is too short, the toilet flapper might not seat properly and the tank will drain continuously. Gently pull the trip lever forward from the tank and tilt it so that the arm will be positioned to slide out (fig.

When satisfied with the operation of the flush lever, replace the tank lid.

They can be trimmed or bent to fit most front, side, or angle mount toilets.

Fluidmaster universal tank levers install easily and come in a variety of finishes.

We have the trip levers and flush buttons for your toilet.

By now you should have purchased a replacement lever and you are ready to go.

Remove the mounting nut on the back of the trip lever by rotating it counterclockwise (fig.

Remove the chain from the arm of the lever.

Either way, lowe's can help.

The lever is inside the tank and is at an angle.

Location:

Share :